Kitchen Remodel Cost in North Dakota (2026)
Our estimate for a kitchen remodel in North Dakota is $32,200, in a range of $13,800 to $69,000. Our North Dakota index sits 8% below our national baseline.
This is a modeled estimate, not a quote
We calculate the $32,200 figure above like this: $32,200 = $35,000 national baseline for a kitchen remodel × North Dakota's 0.92 cost index. The low and high ends are the same baseline range ($15,000–$75,000) run through the same index. Both the baseline and the index are figures we set and publish ourselves — no contractor has priced your job, and nothing here is a bid.
In practice, written bids routinely land 30–50% either side of a modeled number, because a model cannot see your site conditions, your scope, or how booked your local trades are. Use this to set a budget and sanity-check a bid, then get at least three itemized quotes. Cost model last reviewed: August 2026. Full methodology.
Typical North Dakota home value: about $260,000 — a rounded reference figure we maintain to put project cost in context, not an appraisal or a current market index | Region: midwest
If you are planning a kitchen remodel in North Dakota, expect to pay somewhere in the $13,800–$69,000 range, with most projects settling near $32,200. That is roughly 8% below our national baseline, and the gap comes down to local realities rather than national trends.
Cabinets alone typically take about a third of a kitchen budget, and moving from stock to semi-custom to full custom can double that line on its own. The biggest line here is cabinets, and product rather than labor is what you are buying. North Dakota sits close to national material pricing, so your grade selection is the real lever. Statewide, North Dakota comes in about 8% under the national baseline, which is why national averages tend to overstate what you will actually be quoted here.
A kitchen remodel is almost entirely indoor work, so the weather hits your schedule rather than your materials — deliveries, inspections and cabinet lead times are what slip. In practice, North Dakota means some of the coldest winters in the lower 48, deep frost, persistent wind, and a short but productive summer season. North Dakota's frost depth is among the deepest in the country, and the western oil-patch counties periodically pull skilled trades away from residential work entirely. Trade availability in the western part of the state fluctuates with energy-sector activity, which can move both pricing and lead times.
Costs are not uniform across the state either — homeowners in Fargo, Bismarck, Grand Forks often see different quotes than those in smaller towns, which is why the city-by-city table below is usually more useful than a single statewide figure. The estimates here apply North Dakota's labor index (0.9x) and material index (0.95x) to our national baseline. Those indices describe how far we judge North Dakota to sit from the national average on trade wages and material and delivery costs — they are not a survey of local bids, and no contractor has quoted the number on this page.
North Dakota Cost Range
Low End
$13,800
Average
$32,200
High End
$69,000
How We Calculated the North Dakota Estimate
Every figure on this page comes out of two hand-maintained files and one multiplication. There is no live pricing feed and no licensed cost database behind it, so rather than ask you to take the numbers on trust, here is the whole calculation for a kitchen remodel in North Dakota:
| Figure | National baseline | North Dakota index | Shown on this page |
|---|---|---|---|
| Low end | $15,000 | × 0.92 | $13,800 |
| Typical (mid-scope) | $35,000 | × 0.92 | $32,200 |
| High end | $75,000 | × 0.92 | $69,000 |
Where the baseline comes from. The $15,000–$75,000 national range for a kitchen remodel is an informed editorial estimate that we set and revise by hand. It is meant to be a range a working contractor would recognize, not a figure precise to the dollar.
Where the North Dakota index comes from. We rate North Dakota at a 0.92 overall cost index, built from a 0.9x labor index and a 0.95x material index. Those judgements are informed by publicly observable trade wage levels, retail material and delivery prices, and the state's permitting, licensing and code requirements — not by proprietary bid data, which we do not have.
The cost breakdown and city figures. The component amounts further apply the labor index to labor lines and the material index to material lines, so they show where money tends to go rather than summing exactly to the total. City figures apply an additional metro factor to the statewide number. Both are directional.
What this estimate is not. It is not a quote, a bid, an appraisal, or a guaranteed price, and it is not a claim about what any specific North Dakota contractor charges. Real written bids routinely land 30–50% either side of a modeled figure — a model cannot see knob-and-tube wiring, a driveway a truck cannot reach, or the fact that the only licensed installer nearby is booked six months out. Treat this page as the start of the conversation and get at least three itemized quotes.
Last reviewed. The baselines and state indices behind this page were last reviewed in August 2026. We bump that date only when a person actually re-checks the underlying numbers, so it never claims a freshness the data does not have. The complete state-by-state multiplier table and our known limitations are published in the full methodology.
How this figure was calculated
The costs on this page are modeled estimates, not quoted prices. Each one starts from a national baseline range that we set ourselves for the project, which is then adjusted by our own state cost multiplier — and, for major metros, a further city factor. That is the entire calculation: a baseline we wrote down, multiplied by an index we built.
There is no live pricing feed behind this page and no licensed cost database. The figures are informed by publicly observable trade wage levels, regional material and delivery costs, and each state's published permit and code requirements — but the blending is an editorial judgment, and no government agency publishes or endorses our index.
What goes into the number
- National baseline ranges set editorially by HomeCostLab, one per project
- HomeCostLab state cost multiplier index — the full 50-state table is published on our methodology page
- Publicly observable construction-trade wage levels, regional material and delivery costs, and published state permit and code requirements
Treat this as an estimate, not a guaranteed figure.Real bids routinely land 30–50% away from a modeled estimate in either direction, because a model cannot see your site conditions, your scope, or your local contractor availability. Get at least three written, itemized quotes from licensed local professionals before committing. See our full methodology for the baseline logic, the complete state multiplier table, and the known limitations.
Cost Breakdown in North Dakota
Labor multiplier: 0.9x | Material multiplier: 0.95x
What $13,800, $32,200, and $69,000 Get You in North Dakota
The same kitchen remodel can span a wide range depending on materials and scope. Here is what each price point typically buys at North Dakota rates:
Budget
$13,800
Toward the bottom of the range, that means keeping the layout and plumbing exactly where they are — refacing or stock cabinets, laminate or entry-level solid-surface counters, a new sink and faucet, and fresh paint.
Standard
$32,200
At this level you are into semi-custom cabinets in your choice of door style and finish, quartz counters, a mid-range appliance package, new lighting, and small layout tweaks that do not move the plumbing.
Premium
$69,000
At the top of the range you are paying for relocating the sink or range, cabinetry built to your actual walls, stone counters with a fabricated edge detail, a professional appliance package, and a properly sized ventilation hood.
How Homeowners Insurance Is Priced
Our guide explains what drives a premium, which coverage limits actually matter after a renovation, and how to compare policies without getting lost in the fine print.
Permits & Timing for a Kitchen Remodel in North Dakota
Permits follow the plumbing, gas and electrical work rather than the cabinets, so a cosmetic refresh and a layout change live in completely different permit worlds. As a rule: usually required for plumbing, electrical, and structural changes — and in North Dakota the inspection calendar, rather than the construction itself, is usually what sets your finish date. Cabinet lead times, not crew availability, usually set a kitchen's real start date — the order confirmation is the milestone that matters. Interior work is the winter default here, and crews are far easier to book for it than for a summer exterior slot — which is when to ask, if the date is flexible. Typical duration is 4–12 weeks depending on scope. One North Dakota-specific step worth doing first — verify the Secretary of State contractor license, and confirm the footing design matches your county's frost depth.
Paying for a Kitchen Remodel in North Dakota
Against North Dakota's $260,000 median home value, $32,200 represents about 12.4% — meaningful, but well short of refinance territory. A kitchen is usually the largest single-room spend in a house, which is why home-equity products dominate here — but draw only what the signed scope requires, because kitchen scope creep is legendary.
How to Pay for a Kitchen Remodel in North Dakota
With North Dakota projects running $13,800–$69,000, most homeowners spread the cost rather than pay cash. These guides break down the financing options that fit a kitchen remodel of this size:
- Home Equity: How to Use It for Renovations
Tap the equity you've already built to fund the work — how HELOCs and home equity loans compare, and the risks to weigh first.
- Cash-Out Refinance Guide 2026: How It Works, Rates & When It's Worth It
Roll the project cost into a new mortgage and pull cash out — how it works, current rates, and when it actually pays off.
- HELOC vs Personal Loan for Home Improvement: Which Is Better?
Compare a HELOC against a personal loan: interest rates, possible tax benefits, and which one costs you less.
How to Save on a Kitchen Remodel in North Dakota
- ✓Schedule when the local crews are quiet, not when you happen to decide. Cabinet lead times, not crew availability, usually set a kitchen's real start date — the order confirmation is the milestone that matters. Interior work is the winter default here, and crews are far easier to book for it than for a summer exterior slot, so a booking made then usually gets you a better crew at a better price than a spring enquiry would.
- ✓Get three bids and interrogate them properly. Kitchen bids are hard to compare because each one carries different allowances. Make every bidder state the cabinet, countertop, tile and appliance allowance in writing, then price your actual selections against it — the cheaper-looking bid is often the more expensive one once you finish choosing finishes. Even in a lower-cost state like North Dakota, that level of detail is what lets you compare like for like instead of guessing.
- ✓Keeping the sink, range and refrigerator in their existing positions is the single biggest saving available on a kitchen, and no guest will ever notice the difference.
- ✓If the kitchen floor is coming up anyway, running the same flooring through adjoining rooms while the crew is there costs far less per square foot than a separate job later. With such a short season, grouping projects into one summer with one mobilized crew is the single biggest scheduling saving available in North Dakota.
- ✓The professional-grade range is the classic kitchen overspend: it forces a larger hood, a dedicated circuit and sometimes gas work, all for a burner most households never fully use. North Dakota requires a state contractor license, administered through the Secretary of State, for work above a modest dollar threshold.
DIY vs. Hiring a Pro for a Kitchen Remodel in North Dakota
Demolition, painting and hardware are realistic homeowner tasks in a kitchen; cabinet setting, countertop templating, gas and electrical work are not. Labor is roughly 25% of this project, so partial DIY genuinely moves the number. Labor is comparatively cheap in North Dakota, which narrows the gap between doing it yourself and simply hiring it out — often enough to make hiring the better trade. For anything touching structure, gas or wiring, use a licensed trade regardless of how the maths looks.
Home Improvement in North Dakota
North Dakota's oil boom in the Bakken formation region dramatically inflated construction costs in western parts of the state, though prices have moderated from their 2014-2015 peaks. Fargo and Bismarck offer more stable renovation markets with adequate contractor availability and costs near the national average. The state's sparse population in many areas means renovation projects outside of metro centers face limited contractor options and potentially longer lead times for specialty trades and materials.
Climate Considerations for North Dakota Projects
North Dakota's extreme continental climate—with winter temperatures routinely dropping below -30°F and wind chills exceeding -50°F—demands the highest-performance building envelopes in the Lower 48. Frost depth reaches 5-6 feet in parts of the state, requiring deep foundation footings and careful management of frost heave around exterior structures. The brief construction season (May through October in most areas) compresses scheduling and creates peak-season labor demand that can increase costs by 10-15% during summer months.
Contractor Licensing in North Dakota
North Dakota requires contractor licensing through the Secretary of State's office, with a focus on financial responsibility including proof of bonding and insurance. The state licensing process is relatively streamlined compared to coastal states, without requiring a trade-specific competency exam for general contractors. Electricians must be licensed through the North Dakota State Electrical Board, and plumbers require state certification. Municipal licensing requirements in Fargo, Bismarck, and Grand Forks supplement state registration.
North Dakota vs National Average
National Average
$35,000
North Dakota Average
$32,200($-2,800 vs national)
How Our Kitchen Remodel Estimate Shifts Across North Dakota Metros
Costs move from one metro to the next with local demand, contractor availability, and cost of living. The figures below are our North Dakota estimate scaled by a metro index we set for each city — we have not surveyed contractors in these cities, and no one has priced your job. Read the percentages as our judgment of how far each metro sits from the statewide figure:
| City | Low | Average | High | vs State Avg |
|---|---|---|---|---|
| Fargo, ND | $14,214 | $33,166 | $71,070 | +3% |
| Bismarck, ND | $13,800 | $32,200 | $69,000 | on par |
| Grand Forks, ND | $13,386 | $31,234 | $66,930 | -3% |
These are modeled figures, not quotes: the North Dakotaestimate multiplied by our own metro index. They carry the same 30–50% bid spread as every other number on this page, and we deliberately do not publish neighborhood- or ZIP-level figures, because we have no data that fine.
Regional Considerations in North Dakota
Permits & Inspections
Permitting is municipal with modest fees, and extreme-cold energy code review applies to larger renovations. The short building season is often a bigger constraint than the paperwork.
Local Labor Market
Labor runs near the national average, with summer peak-season demand pushing costs up 10-15% in the brief building window.
Climate & Cost Impact
Brutal cold, deep frost, and heavy snow loads demand the highest-performance building envelopes in the Lower 48.
Tips for Your Kitchen Remodel in North Dakota
- ✓Get at least 3 quotes from licensed contractors in Fargo or your area.
- ✓Schedule during fall or winter for potentially lower labor rates in North Dakota.
- ✓Extreme cold weather insulation requirements
- ✓Consider financing options like a HELOC or personal loan for projects over $10,000.
Kitchen Remodel Cost in North Dakota: FAQ
How much does a kitchen remodel cost in North Dakota?
We estimate $13,800 to $69,000 for a kitchen remodel in North Dakota, with a mid-scope job modeled at $32,200. That figure is our $35,000 national baseline multiplied by North Dakota's 0.92 cost index, which puts it roughly 8% below our national baseline. It is a planning estimate rather than a quote — written bids commonly come in 30–50% either side of a modeled number, depending on scope, materials, and where in the state you live.
What is the biggest cost factor in a kitchen remodel?
In our kitchen remodel cost model, Cabinets is the largest single line item at about 30% of the total. We rate North Dakota labor at 0.9x the national level, so the labor share of the job moves the most from state to state. Getting several itemized local bids is the only reliable way to pin down your own number.
Does a kitchen remodel cost more or less in North Dakota?
North Dakota comes in about 8% below national on this, with a typical project around $32,200. Bear in mind that national averages published online will therefore read high for this market.
When is the best time of year for a kitchen remodel in North Dakota?
There is no weather window to hit, so the answer is about crew availability: interior work is the winter default here, and crews are far easier to book for it than for a summer exterior slot. Cabinet lead times, not crew availability, usually set a kitchen's real start date — the order confirmation is the milestone that matters.
How long will I be without a kitchen during a remodel?
Plan on the kitchen being genuinely unusable for most of the project, not just during demolition. Set up a temporary kitchen with the refrigerator, microwave and a sink you can actually reach before day one — homeowners who skip this step end up eating out and quietly adding a four-figure line to the real cost of the project. Frost depth requirements mean footings go deeper here than almost anywhere, which adds real cost to anything with a foundation.
What should I verify before hiring a kitchen remodel contractor in North Dakota?
Verify the Secretary of State contractor license, and confirm the footing design matches your county's frost depth. Kitchen bids are hard to compare because each one carries different allowances. Make every bidder state the cabinet, countertop, tile and appliance allowance in writing, then price your actual selections against it — the cheaper-looking bid is often the more expensive one once you finish choosing finishes.
Can you get a kitchen remodel in North Dakota for less?
Around $13,800 is where North Dakota quotes bottom out, and what you give up to reach it is scope and material grade. Cabinets alone typically take about a third of a kitchen budget, and moving from stock to semi-custom to full custom can double that line on its own.
Ways to Finance a Home Project
How a HELOC, a home equity loan, and an unsecured personal loan differ in cost, risk, and timeline — and which tends to suit which size of renovation.
Where Kitchen Remodel Projects Happen in North Dakota
Kitchen Remodel demand in North Dakota is concentrated in and around its largest population centers like Fargo. If you are outside these metros, expect to factor in some contractor travel and possibly longer scheduling.
Compare With Neighboring States
| State | Low | Average | High | vs National |
|---|---|---|---|---|
| North Dakota | $13,800 | $32,200 | $69,000 | -8% |
| Minnesota | $15,300 | $35,700 | $76,500 | +2% |
| South Dakota | $13,200 | $30,800 | $66,000 | -12% |
| Montana | $15,000 | $35,000 | $75,000 | +0% |
Kitchen Remodel Guides
Learn more about planning, materials, and financing your kitchen remodel:
Need help financing your kitchen remodel?
Most homeowners don't pay for major projects out of pocket. Explore your options — from HELOCs to personal loans — and find the best rate.